110VDC DPDT Relay
Complete Overview: Contact points are rated at 30 amps per pole 110 VDC coil DPDT (double pole, double throw) relay. Used in all 30 Amp Parallax ATS, Todd TS-30, and Progressive Dynamics 700 series converter transfer switches.
!!!DO NOT USE THIS SWITCH FOR TS-50 !!!
The coil used to pull down the contact points of this relay is rated 110 VDC, usually you will read about 110 to 160 VDC the coil itself can be checked by ohming it out. Anywhere between 5000 to 6000 ohms on the ohm meter is good, outside that range, REPLACE THE RELAY.
R & K Products
3750 Metropolis Lake Road
West Paducah, KY 42086
Phone Toll Free: 877-503-9062